Drive Adapters and Drive Converters

This is a 10/100 Mbps USB to Lan RJ45 Network Card Adapter - Fr Laptop PC Ethernet External.

2 x Port SATA III 6Gb/s PCI Express RAID Card Controller Card - PCIE SATA III 6Gbps SATA III 2-Port 1X1 Card with IDE

The unit provides 2-port Mini PCI-e SSD connector, built-in 2.5-inch shell SATA II high-performance array card. It provides hardware to setup the RAID level, no driver, BIOS or software required for RAID installation, can be switched to RAID 0, RAID 1, JBOD three mode operation settings. 

‌2.5" SATA Express to M.2 (M-key) and mSATA Adapter with new dual port cable

This is an Apple 2012 MACBOOK PRO Retina A1398 MC975 MC976 + MACBOOK Air MD224 MD223 MD231 MD232 SSD to a 3.5 Inch SATA Adapter card.

This is a 28 Pin SSD to M.2 PCIe adapter.

It allows the user to use an SSD from 2013 or 2014 Macbook SSD module through a USB 3.0 port on your desktop or laptop.

SFF-8482 SAS 22 Pin to 7 Pin + 15 Pin Power SATA Hard Disk Drive Adapter

SFF-8482 SAS 22 Pin to 7 Pin + 15 Pin Power SATA Hard Disk Drive Adapter

This adapter converts a 24 Pin SATA LIF SSD to a 1.8 Inch CF 50 Pin motherboard for Toshiba or Samsung MACBOOK AIR SSD.

This is a SAS 29 Pin adapter.  It has a SATA 29 pin Male plug and a 29 Pin Female socket.   Great for saving an original  SAS Drives 29 Pin SAS connector from wear and tear from multiple insertions. The unit also acts as an extender. 

3.5 Inch SFF-8639 to U.2 M.2 NVMe SSD Caddy‌

3.5" SATA Dual Port to M.2 SSD x2 & mSATA SSD x2 Adapter with 3.5" Metal Frame

‌U.2 Male to U.2 Female Adapter with 12V and 3.3V Hot Plug Power Protection with 3.5 Inch Housing

3.5" U.2 male to M.2 & M.3 SSD Caddy with 12V & 3.3V Aux Hot Plug‌

This adapter is designed to enable 4 micro SD Cards to be used as a direct replacement for a 1.8 Inch Micro SATA hard drive.  Once installed  the micro SD appears as an ordinary Micro SATA hard drive to any OS and can be configured as a bootable device.

The 4-port SD to SATA adapter with 2.5” Housing is an economical 2.5" SSD. It uses a 2.5" ultra-lightweight aluminum material shell, coupled with the SD Card combination to SATA adapter. When assembled, it can operate in a variety of operating systems. Such as DOS, Windows 95, 98, XP, 2000, Vista,Win 7, Linux, Unix, and so on. The adapter allows the installation of SD Card as system disk, boot the operating system directly, without having to install any drivers.