2.5 Inch

Aluminum / Plastic 2.5" Black SATA I/II/III USB 3.0 2.5" SATA 6Gb/s to USB 3.0/eSATA HDD Enclosure

This adapter is designed to enable a CFAST SSD Card as a direct replacement for a 2.5 Inch SATA hard drive.‌

• M.2(NGFF) SSD to IDE 44-pin Embedded Module
• Green LED indicates the M.2SSD's Power status
• Red LED indicates the M.2SSD's Active status
• PWM synchronous buck converter Power IC
• 3A maximum output current
• Short circuit protection
• In-rush current suppression
• Thermal shutdown protection
• ESD HBM (Human Body Mode)/2KV
• Support SATA Reversion 3.2
• Fully compliant with PCI Express M.2 Spec. Ver. 1.0
• Support ATA/ATAPI-7 specification
• ATA/ATAPI Ultra DMA Mode 0, 1, 2, 3, 4, 5, 6

IDE to mini PCI-e (PATA) SSD adapter with PATA 2.5” SSD Housing. This unit uses a 2.5" ultra-lightweight aluminum material shell, coupled with the mini PCI-e(PATA) SSD combination to IDE adapter. When assembled, it is a standard 2.5” SATA SSD.

This is an economical 2.5 "SSD Kit. It includes a 2.5 inch ultra-light aluminum housing and a SATA adapter.  Plugging any mini PCI-e (SATA interface) SSD module into this kit, it turns into a standard 2.5 Inch SATA SSD. The unit allows you to boot OS and run program from this drive directly. It works with DOS, Win95, Win98, Win XP, Win 2000 and Win7,Linux and Unix.It doesn’t require any extra hardware drivers.

Upgrade kit to Install a Second 2.5" HDD in the MSI GT72 Dominator Laptop

The SATA II to LIF Adapter with 2.5 Inch Housing is an economical 2.5" SSD. It uses a 2.5 Inch ultra-lightweight aluminum material shell, coupled with the SATA LIF SSD combination to SATA adapter. When assembled, it is a standard 2.5" SATA SSD. It also allows the installation of SATA LIF SSD as system disk, boot the operating system directly, without having to install any drivers, but does not affect the execution speed of the SSD storage devices.

This unit is a SATA III to mSATA adapter, providing one 7+15pin SATA connector on the host connection and one Mini PCI-e 52-pin connector on the SSD storage devices connections.

SATA III to M.2 SSD Adapter Device Sleep Mode (DEVSLP) with 2.5 Inch 9.5 MM Drive Housing

The SATA III to mSATA Adapter with 2.5 Inch Housing is SATA III to mSATA adapter, providing one 7+15pin SATA connector on the host connection and one Mini PCI-e 52-pin connector on the SSD storage devices connection.  

The SATA III to mSATA Adapter with 2.5 Inch Housing adapter allows the installation of an mSATA SSD as system disk, boot the operating system directly without having to install any drivers, but does not affect the execution speed of the SSD storage devices.

Steel SATA SSD 2.5 Inch Housing for CF, SD, 1.8 ATA SATA Adapters. Dimensions are 91 x 67 x 9 mms (L x W x H)

‌Slimeline SAS (SFF-8654) plus SATA to 2.5 Inch SSD in 3.5 Inch Caddy

SlimSATA MO-297 SSD Enclosure Housing. The MO-297 is a JEDEC Standard. The Slim SATA housing we have developed is a universal housing to fit the MO-297 SSD.‌

This U.2 (SFF-8639) and SATA 7+15 Pin to M.2 SSD Adapter is up to 110 mm in size.

USB 3.1 / 10Gps Micro B Type for M.2 SSD and mSATA SSD - USB3.1 microB to M.2/mSATA SSD Enclosure (M.2 or mSATA works alternative).

‌USB 3.1 10Gps C Type to M.2 NVME Enclosure

‌

‌USB 3.1 Gen2 2.5 Inch SSD Case Enclosure Silver

USB 3.1 / 10 Gbps Micro B to M.2 B Key X2 Raid Card