Slimline SAS 8-Lane for Dual Port M.2/M.3 NF1 NVMe SSD Adapter

This adapter card is used to support bifurcated x8, x16 PCIe Gen 3 AIC or follows the SFF-9402 pinout specificaon RAID Card

• It allows dual ports to have M.3 SSD x 2 in one PCBA and also with M.3 heatsinks.
• It is Slimline SAS 8i (SFF-8654) to M.2 and M.3 NVMe SSD Dual ports card.
• The specification is support SFF-9402 signal pin out, not for Broadcom/Intel.
• CLOCK also support 2 kinds of pinout for INTEL and SFF-9402

• Built-in +12V Hot Plug protection power module for M.3 NVMe SSD
• Built-in +3.3V Hot Plug protection power module for M.2 NVMe SSD
• SFF-8654 Slimline SAS 8i to M.2, M.3 convert
• Built-in SFF-8654 8i connector, pin-out defined by PCIe ※ Built-in M.2 M-key connector, pin-out defined by PCIe
• LED 1, LED4 Red LED Blinking indicates SSD active status
• LED 2, LED 5 Green LED on M.3 SSD power ready
• LED 3, LED 6 Green LED on M.2 SSD power ready

• Compliant with NVM Express 1.2a
• Supports PCI Express Base Specification Rev 3.1
• Supports PCI Express M.2 Specification Revision 3.0, Version 1.2 _06262019
• Compliant with SFF-8654 Specification Rev 1.2
• Support Samsung M.3 NF1 Datasheet_v0.4
• The adapter SFF-8654 Slimline SAS 8i connector pinout based on SFF-9402 Rev1.1

Supports the following form factor M.2 & M.3 SSD:

• Type 2242-D2-B-M: 42mm(L) x 22mm(W)
• Type 2260-D2-B-M: 60mm(L) x 22mm(W)
• Type 2280-D2-B-M: 80mm(L) x 22mm(W)
• Type 22110-D2-B-M: 110mm(L) x 22mm(W)
• Type 305110-D2-B-M: 110mm(L) x 30.5mm(W) for M.3 NF