PCIe x8 Gen4 with ReDriver to Gen-Z 2C (EDSFF) AIC

Availability: In stock
Only 2 left
Part #

PCIe x8 Gen4 with ReDriver to Gen-Z 2C (EDSFF) AIC

The PCIe x8 Gen4 with ReDriver to Gen-Z 2C (EDSFF) AIC is a programmable power module that provides the electrical interface between the host system and its peripheral devices. The module supports PCI Express Gen4 x8 lane widths, which allows for data transfer rates up to 8 GT/s per lane. The module integrates three operational amplifiers (op amps) and one driver amplifier that support voltage gain in excess of 100 dB at frequencies up to 200 MHz. The op amps are designed to work with frequencies as high as 500 MHz but can also be connected directly to an external clock source without any performance degradation. The module also features programmable current limit and slew rate control, which can be adjusted from 1A to 6.5A and from 3V/ns to 20V/ns, respectively. This feature allows users to adjust the module's behaviour based on their application needs.

More Information
Part # GENZ-1907-CRD
Bar Code (UPC) 611851925758

PCIe x8 Gen4 with ReDriver to Gen-Z 2C (EDSFF) AIC

Features :

  • Supports Server BMC management
  • Supports Industrial Grade temerature range
  • The card should be compliant with PCIe 4.0 CEM spec
  • Built- in EDSFF 2C with latch connector
  • Built- in PCIe ReDriver to extend PCIe Gen4, 8-Lane data width link signals
  • Built- in PCIe 100MHz Clock buffer to drive longer trace lengths and longer cable, Address: 0x6C(7 bits) for BMC management
  • Built- in SMBus I/O Expander, Address: 0x21(7 bits) for Gen-Z 2C PWRDIS control
  • Supports PCIe PERST0# for OOB(out of band) management to remote Gen-Z 2C Reset
  • Supports PCIe PERST1# for OOB(out of band) management to remote Gen-Z 2C Reset
  • Built- in WAKE# bidirectional voltage-level translator for Open-Drain output to be used over longer trace lengths and over longer cable - Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
    • Programmable Current Limit: 6.5A
    • Programmable Inrush Current Slew Rate
    • Thermal shutdown protection and fault alert
    • Back-to-Back (B2B) FET Operation

  • Built-in 12V input with 400W TVS(TRANSIENT VOLTAGE SUPPRESSOR) ESD protection
  • Built-in 12V output with 30-V, N channel NexFET power MOSFET, 32 m ohm
  • Built-in 12V output with SCHOTTKY BARRIER Power Rectifier

Specifications :

  • PCI Express Base Specification Rev 4.0
  • PCIe_CEM_SPEC_R4_V1_0_08072019_NCB
  • Compliant with SFF-TA-1002 Specification Version 1.3
  • Compliant with SFF-TA-1006 Specification Version 1.4
  • Compliant with SFF-TA-1009 Specification Version 3.0
  • Compliant with SFF-TA-1020 Specification Version 1.0

Micro SATA Cables PN # GENZ-1907-CRD

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

We are proud to offer an everyday volume discount program. Simply enter the Promo Code: VOLUME in the Cart to receive the following savings.

Save when you spend:

  • Spend $300.00+, save 5% on your order
  • Spend $500 or more and save 10% on your order
  • Enjoy Free Shipping on all domestic US orders over $500
Please note:
  • Discounts will be applied with entry of Promo Code "VOLUME" in the Discount Codes section of the shopping cart
  • Discounts may not be used with other promotions
  • Discounts are based on order subtotals (before tax & shipping)
  • Discounts are on the current total order amount only

Don't see exactly what you need?

Our business is built upon our expertise and our ability to respond to special requests. Our philosophy is that "today's special order may become tomorrow's best seller". In fact special orders are part of how we've become the "go-to" supplier for hard to find cables, connectors and adapters.

Click here to send us your special order request!