PCIe Gen4 U.2 (SFF-8639) to M.2 NVMe Adapter

PCIe Gen4 U.2 (SFF-8639) to M.2 NVMe Adapter

Features :

• M.2 NVMe to U.2(SFF-8639) convert
• Built-in SFF-8639 connector, pin-out defined by SFF-9402 Rev1.1
• PWM 12V to 3.3V synchronous buck converter Power for M.2 NVMe SSD
• • 5.5A maximum output current
  • Output Discharge Control
  • The output overcurrent protection(OCP)
  • Uundervoltage lock out protection(UVLO) monitor
  • Over/Under Voltage Protection
  • Thermal shutdown protection
  • ESD HBM (Human Body Mode)/500V
• Built-in 3.3V Hotswap Power controller with programmable Inrush Slew rate, support a maximun continuous current of 6.5A for M.2 SSD protection
• Built-in 3.3V input with 400W TVS(TRANSIENT VOLTAGE SUPPRESSOR) ESD protection
• Supports M.2 3.3V&1.8V supply
• Supports M.2 VIO_CFG Signal
• Supports M.2 PERST# Signal 3.3V and 1.8V voltage level shift
• Supports M.2 CLKREQ# Signal 3.3V and 1.8V voltage level shift
• Supports M.2 WAKE# Signal 3.3V and 1.8V voltage level shift
• Built-in SMBUS EEPROM 64KB
• LED1 RED Blinking indicates M.2 active
• LED4 Green OFF indicates PERST# Normal (Function intentionally inverted)

Specifications :

• Compliant with NVM Express 1.3a
• Support PCI Express Base Specification Rev 4.0
• Support SSD_Form_Factor_Version1_a
• Compliant with PCI Express M.2 Specification Version 1.2
• Compliant with PCIe SFF-8639 Module Specification Rev 3.0
• Compliant with SFF-TA-1001 Rev1.1

Supports the following form factor M.2 SSD :

• Type 2242-D2-B-M: 42mm(L) x 22mm(W)
• Type 2260-D2-B-M: 60mm(L) x 22mm(W)
• Type 2280-D2-B-M: 80mm(L) x 22mm(W)

Unit can be used with our cable Micro SATA Cables PN #OCU-1708-GEN4

OCULINK X4 (SFF-8611) TO OCULINK X4 (SFF-8611) 50 Cm Cable.

Micro SATA Cables PN # U2-1956-M2