Gen Z Golden Finger to M.2 / M.3 SSD Adapter

‌Gen Z Golden Finger to M.2 / M.3 SSD Adapter

• 4 lanes of PCI-e designated
• 4 Layer PCB designed
• Build in M.2 M key connector
• Connected PCIe 4 Lane signals, from M.2 / M key connector to Gen-Z golden finger
• PWM synchronous buck converter power fro M.2 SSD
• 4A maximum output current
• short circuit protection
• Thermal shutdown protection
• ESD HBM (Human Body Mode) / 2KV
• Supports M.2 / 1.8V & M.3 / 3.3V SMB_CLK, SMB_DATA Level Shift
• Supports M.2 / 1.8V & M.3 / 3.3V SMB_CLK, SMB_DATA isolated
• Built in SMBUS EEPROM 256KB
• Supports M.3 Dual ports
• LED3 Green LED on indicates M.3 power ready
• LED2 Green LED on indicates M.2 power ready
• LED1 RED LED Blinking indicates M.2 & M.3 SSD active status
• LED4 Green LED on indicates Gen-Z present

Specifications :

• SFF-TA-1002 Spec Rev 1.0
• SFF-TA-1006 Spec Rev 1.1
• PCIe Express M.2 Spec. Rev. 0.7, Ver. 1.0
• Samsung M.3 Datasheet_v0.4

CON6 Jumper Set up :

• Function 1 : Pin 1 & Pin 2 short, support M.2 SMBUS
• Function 2 : Pin 2 & Pin 3 short, support M.3 SMBUS

CON8 Jumper Set up :

• Function 1 : Pin 1 & Pin 2 short, support M.2 SMBUS
• Function 2 : Pin 2 & Pin 3 short, support M.3 SMBUS

Support M.2 SSD Form Factor:

• Type 2280-D2-B-M: 80mm(L) x 22mm(W)
• Type 2260-D2-B-M: 60mm(L) x 22mm(W)
• Type 2242-D2-B-M: 42mm(L) x 22mm(W)

SSD Shown in pictures is not included.

Micro SATA Cables PN # GENZ-M2-1458