4-Pin Molex to Floppy Drive 4-Pin Power 9 Inch Cable

‌The 4-Pin Molex to Floppy Drive 4-Pin Power 9-inch cable is designed to convert a standard Molex power connector into a connector that can power legacy devices like floppy drives and zip drives.

4-Pin Molex Connector: This is the larger, rectangular connector found on many older power supplies. It provides both 5V and 12V power and was commonly used for powering hard drives, optical drives, and other peripherals in older systems.

4-Pin Floppy Drive Power Connector: The smaller connector on the other end of the cable is designed to power legacy devices such as floppy drives or zip drives. It typically provides the necessary power for these older devices using the 5V rail.

Length: 9 inches (about 22.86 cm), which provides enough length to reach from a Molex power source within the case to a floppy or zip drive.

This cable is useful for anyone working with legacy hardware, allowing older floppy or zip drives to be powered by a modern power supply that still has Molex connectors available.